Roll Forming Machine
Technical Specification :
Roll forming consist pairs of contoured roll tools. While the coil stock is passing through succession contoured rolls the material bends to its desired shape, after final shape is achieved profile straighter gives straightness to outgoing profile.
| Specification | Details |
|---|---|
| No. of Stations | 18 (Full Roller) |
| Width of Coil | 1220 mm |
| Max. Thickness of Coil | 0.80 mm |
| Min. Thickness of Coil | 0.25 mm |
| Max. Weight of Coil | Up to 10 MT |
| Variable Line Speed | 0 to 25 meter/min (without cutting) |
| Horizontal Distance Between Two Stations | 430 mm |
| Max. Vertical Center Distance (Lower to Upper Shaft) | 300 mm |
| Min. Vertical Center Distance (Lower to Upper Shaft) | 150 mm |
| Max. Roll Shaft Diameter | 75 mm |
| Max. Height of Profile | 100 mm |
| Max. Line Speed | 15 MPM |
| Drive Mechanism | Chain Drive |
| Drive Gear Box (Worm Type) | 1 Nos |
| Motor | 10 HP - Havells / Crompton / National |
| Forming Station Type | Stand Type Design |
| Bearing | Ball Bearing (SKF) |
| Shaft Material | En-9 (Turning, Grinding) |
| Roller Material | En-31 (CNC Turning, Grinding, Hard Chrome) |
